04 / Electrical · Repairs & compliance
Electrical work for chalets & apartments
Our qualified, insured electricians handle everything from a dead socket to a complete rewire, to the French wiring standard NF C 15-100, and they explain it in plain English.

01 / What we do
Our electrical services
We cover every kind of electrical installation in homes and commercial premises, from one-off repairs to a full rewire.
Fault-finding
A breaker or RCD that keeps tripping, a circuit with no power, a socket that runs hot, lighting that flickers. We isolate the faulty circuit before replacing anything.
Consumer units
Replacing or upgrading the consumer unit (the tableau électrique), adding circuits, 30 mA RCD protection and clear labelling.
Renovations and full rewires
For any renovation project we offer a complete rewire to current French regulations.
Sockets, switches and lighting
Replacing, moving and adding points. We work out with you where appliances and lights should actually go.
Electric heating
Replacing old convector heaters with more economical radiators, fil pilote programming, electric underfloor heating.
Home automation and remote control
Supplying and installing home management systems so you can control heating, lighting and equipment from wherever you are.
Hot tubs, saunas and steam rooms
Connecting wellness equipment on its own dedicated circuit, with a dedicated breaker and the correct RCD protection.
02 / Compliance
French wiring rules, explained
NF C 15-100 is the French standard for domestic electrical installations, the equivalent of BS 7671 in the UK, and it differs in many details. It requires 30 mA RCD protection on every circuit, an earth electrode and supplementary bonding in bathrooms, safety zones around baths and showers, and a minimum number of sockets and circuits per room. French sockets and switches are also different, so a UK-style layout rarely transfers directly.
An older installation is not necessarily dangerous, but some signs should prompt a check: no RCD, old pin fuses, unearthed sockets, exposed conductors or a consumer unit that feels warm. When a property is sold, or let unfurnished, an electrical inspection (diagnostic électricité) is compulsory for installations over fifteen years old, carried out by a certified inspector. We can then put right whatever the report flags and give you a detailed invoice for the work.
After a full rewire, a certificate of compliance endorsed by Consuel, the French inspection body, may be needed before the supply is reconnected. We will tell you at quote stage whether that applies.
03 / Chalets
Chalet electrics: what is different up here
A ski chalet draws a lot of power at once: electric heating, the hot-water cylinder, a hot tub, a sauna, the oven and hob, plus washing machines and tumble dryers running all day on changeover. If the power rating on the supply contract is too low, the main breaker cuts everything at peak times. Raising the contract is not always the answer: a load-shedding device, which briefly switches off non-essential circuits, or spreading the load more sensibly may do the job. We will look at it with you.
Cold and damp take their toll too. Outdoor sockets, terrace lighting, garages and ski rooms are where insulation faults most often appear, the kind that trip the RCD for no obvious reason. A hot tub wired without a dedicated circuit, or on undersized cable, is another frequent culprit. And trace heating on exposed pipes only protects them if it is properly supplied and protected all winter.
04 / Before you call
No power: what to check before you call
A power cut is not always a fault in your installation. A few simple checks, without opening the consumer unit or touching any wiring, often show where the problem lies and help you describe it to us.
The whole property is off
See whether the neighbours or the street lights have power. If the whole area is out, it is a network fault: the Enedis (French grid) emergency line for Savoie is 09 726 750 73. If not, check the main supply breaker next to the meter.
Only part of the property is off
Find the breaker or RCD that has dropped in the consumer unit and reset it once. If it trips again straight away, leave it off and call us.
The RCD trips at random
Unplug the appliances on that circuit one at a time, then reset. A faulty appliance or a damp outdoor socket is often to blame.
Burning smell, hot socket or consumer unit
Switch off the main breaker if it is safe to do so and stop using the circuit. This is an emergency: call our 24/7 line.
05 / How we work
How we work
All our work is covered by décennale insurance and professional liability insurance. We will personally come back to any work we have done if a problem appears within two years, and equipment carries the manufacturer's warranty when used as intended.
Listening and testing
We listen to what you need, test the installation, and explain what we have found.
Written quote
A detailed devis, free of obligation, which separates what is needed for safety from what is a nice-to-have.
The work
Carried out cleanly, and coordinated with our plumbers and heating engineers where a job needs both, so you are not juggling several firms.
Handover
A labelled consumer unit and a clear explanation of the equipment for you or your chalet manager.
06 / Where we work
Where we work
We cover Bourg-Saint-Maurice and the Haute-Tarentaise resorts: Les Arcs (Arc 1600, 1800, 1950, 2000), La Rosière, Sainte-Foy-Tarentaise, Tignes and Val d'Isère. For a fault, call our 24/7 emergency line. For a full refurbishment, see renovation.
Available now
A leak, no heating, no power?
While you wait: turn the water off at the stopcock. See what to doOn site in about an hour where travel time and access permit. Call-out and out-of-hours charges apply.
Guarantees
What we put in writing, we stand by.
- 24/7
Emergency call-out day and night, weekends included. On site in about an hour where travel permits*.
- 2 years
If a problem comes back on our work within two years, we come back personally to put it right.
- 10 years
All our work is covered by French décennale (10-year) insurance, plus professional liability cover.
- EN · FR
We work in English and French, with you directly or with your property manager.
*Depending on travel time and access conditions (snow, passes, road closures). Call-out and out-of-hours charges apply.
Why does my RCD keep tripping?
Usually because an appliance or circuit has an insulation fault: a damp outdoor socket, a kitchen appliance, a cylinder or hot tub heater element. Unplug appliances one at a time to see if it stops; if it does not, call us.
Can a UK electrician work on my French chalet?
Work in France has to meet NF C 15-100 and, for a full rewire, may need Consuel certification before the supply is reconnected. It also has to be covered by French décennale insurance if you want the ten-year guarantee. We work to those rules and explain them in English.
Can you wire in a hot tub or sauna?
Yes. Each piece of wellness equipment needs its own circuit, with a dedicated breaker and appropriate RCD protection. We do this as part of a new installation or for equipment already in place. See hot tubs and saunas.
Can I control my chalet from home?
Yes. We supply and install home management systems that let you control heating, lighting and some equipment from your phone. The property needs a reliable internet connection.
The power keeps cutting out when the chalet is full. What can be done?
The supply contract's power rating may be too low for everything running at once. A load-shedding device or a better spread of the load can solve it without a bigger contract. We will review your equipment before recommending anything.
Service area